YH-609

Inquiry
YH-609
  • Overview
  • Key Features
  • Parameters
  • Related Products
Overview

The YH-609 GNSS antenna adopts multi-arm and multi-feed point technology, supports the reception of L1, L2/L5 and L-band satellite navigation signals of Beidou, GPS, GLONASS and GALILEO systems, has built-in pre-filter, low-noise amplifier and final-stage filter, good out-of-band suppression and strong anti-interference ability, ensuring normal operation in harsh electromagnetic environments. It meets the current needs of multi-system compatibility and high-precision measurement.

Key Features
Key Features
Multi-System & Multi-Band Compatibility with Strong Anti-Interference
Multi-System & Multi-Band Compatibility with Strong Anti-Interference
Adopts multi-arm and multi-feed point technology, supporting reception of L1/L2/L5 (GPS), L1/L2/L3 (GLONASS), B1/B2/B3 (BDS), E1/E5/E6 (Galileo), and L-band signals. Equipped with built-in pre-filters and low-noise amplifiers (LNA), it delivers excellent out-of-band suppression, ensuring stable operation in harsh electromagnetic environments—ideal for high-precision measurement scenarios like UAVs and micro RTK.
Optimized Quadrifilar Helix Antenna for Superior Signal Reception
Optimized Quadrifilar Helix Antenna for Superior Signal Reception
Utilizes quadrifilar helix architecture to ensure right-hand circular polarization (RHCP) and stable phase center performance, minimizing measurement errors. With peak gain ≥3.0 dBi, small gain roll-off, and axial ratio ≤1.5dB @ zenith, it excels in receiving low-elevation satellite signals, enhancing positioning reliability across 360° azimuth coverage.
High-Performance LNA for Precise Signal Amplification
High-Performance LNA for Precise Signal Amplification
Features LNA with gain of 35±3.0dB, low noise figure (≤1.8dB @25°C with pre-filter), and output VSWR ≤1.8:1 (typ.), effectively amplifying weak signals while reducing interference. Compatible with 3.0~6.0V DC power supply (current ≤50mA), ensuring stable signal transmission for high-precision applications.
Compact, Lightweight & Rugged for Portable Scenarios
Compact, Lightweight & Rugged for Portable Scenarios
Weighs ≤38g with a space-saving design, easy to install via 3 bottom screws. IP67 waterproof rating, operating temperature -40℃~+85℃, and 95% non-condensing humidity resistance make it ideal for portable devices like sub-meter handhelds/tablets, ensuring durability in harsh environments.
Parameters

Numbered version:

YH-609 V1.0

Preparation/Date:

2022.03

Antenna

 

Patch Architecture

Quadrifilar Helix

Pre-filter

Supported positioning signal bands

GPS: L1/L2/L5

GLONASS: L1/L2/L3

BDS: B1/B2/B3

Galileo: E1/E5/E6

L-band

Peak Gain*

≥3.0 dBi

Polarization

RHCP

Axial Ratio@zenith

≤1.5dB

Azimuth Coverage

360°

Impedance

50 ohm

LNA

Frequency Range

1164 MHz~1278 MHz

1525 MHz~1615 MHz

LNA Gain*

35±3.0dB (Typ. @25°C)

Noise Figure*

≤1.8 dB at 25°C, Typ. (Pre-filter)

Output VSWR

≤1.8:1 typ. 2.0:1 max

Operation Voltage

3.0~6.0V DC,(Recommended 3.3V or 5.0V)

Operation Current

≤50mA

Mechanical & Environmental

Dimension

See attached picture

Connector

SMA-J (internal thread needle)

Radome

ABS+PC

Weight

≤38 g

Attachment Method

Through the 3 screws at the bottom

Operating Temp

-40℃~+85℃

Storage Temp

-45℃~+85℃

Humidity

95% No-condensing

Waterproof

IP67

Applications
Anti-Jam
Autonomous Vehicles
Precision Agriculture
Robotics
Survey
UAV