The YM-181Q GNSS module uses the latest generation of Ublox chip M10 with strong performance and faster star search speed, up to 32 satellites can be used for accurate positioning and on-board high-performance geomagnetic compass sensor QMC5883L.
The YM-181Q GNSS module uses the latest generation of Ublox chip M10 with strong performance and faster star search speed, up to 32 satellites can be used for accurate positioning and on-board high-performance geomagnetic compass sensor QMC5883L.
The YM-181Q GNSS module uses the latest generation of Ublox chip M10 with strong performance and faster star search speed, up to 32 satellites can be used for accurate positioning and on-board high-performance geomagnetic compass sensor QMC5883L.
All three kinds of positioning in one, better navigation
GPS+BDS+GALILEO joint positioning, flexible choice, you can choose to use the selection of positioning mode, you can choose single mode positioning, multi-mode combination positioning according to project requirements.
Small size and light weight
Using high performance small volume antenna, miniaturized design, performance does not shrink. Light weight up to 11g, ideal for small traverser/loop machine/light fixed wing use.
Powerful star search performance
T-antenna network design, impedance matching (50Q), antenna standing wave ratio less than 1.5, play the module receiving power advantage, so that the star search performance is strong, accurate positioning.
Get accurate data
Precise position can be obtained by latitude and longitude, and speed and time information can be learned.
Product parameter:
Receiver type |
GPS/QZSS L1C/A SBAS EGNOS, GAGAN, MSAS and WAAS BDS B1I Galileo E1B/C |
Sensitivity |
Tracking & Navigation -166dBm Reacquisition -160dBm Cold start -148dBm Hot start -148dBm |
Acquisition |
Cold start 26S Hot start 1S |
Horizontal position accuracy |
1.5 m CEP |
Velocity accuracy |
0.05 m/s |
Accuracy of time pulse signal |
RMS 30ns 99% 60ns |
Operational limits |
Dynamics ≤ 4g Altitude 80000 m Velocity <500 m/s |
Frequency of time pulse signal |
1Hz |
Baud rate |
4800-460800 bps, default 38400 bps |
Update rate |
Up to 10 Hz, default 1Hz |
Output level |
TTL level |
Output protocols |
NMEA-0183, UBX |
Physical Characteristics & Working environment:
Dimension |
18*18*7.8mm(±0.3mm) ) |
Working voltage |
3.6-5.5V, Typical 5V |
Working current |
40mA@5.0V |
Weight |
8g |
Connector |
1.0mm 6Pin |
Operating temperature(℃) |
-40-+70 |
Storage temperature(℃) |
-55-+85 |
Indicator light |
The blue indicator is steady on after power-on, flashing after 3D positioning |